Fiber Optic Connectors

We manufacture a complete line of fiber optic cables using the following industry standard fiber optic connectors:

Fiber Connector Introduction
Optical fiber connectors constitutes a fiber-to-fiber interconnection and aligns the fiber core of two optical fibers. Due to the fast development of optical nets a variety of optical fiber connectors are available. The main difference is in the dimensions and the mechanical grip. If the fiber end is angled to reduce back reflections this is usually described by adding APC (Angled Physical contact Connector) to the name.


Insertion Loss
Insertion loss should not exceed 0.75 dB and the return should not be higher than -20dB. Typical insertion repeatability, i.e. the difference in insertion loss between one plugging and another, is 0.2 dB.

E-Mail or Call us at today with your requirements

| On-line Store |
| Products At-a-Glance | Products & Service | High-End Communications Cables | Cisco | Bay Networks | IBM | Racal | HP | ADC Kentrox | 3-COM | Ascend | Codex | SUN | Fiber Optics | SCSI & HIPPI Cables | Low Voltage SCSI | Wire Harnesses | Ethernet | Fast Ethernet | Telco | IEEE-1284 | Protocol Converters | SCA Adapters | New products | Tools & Testers | Quote Request | Home |

 For Technical Support  and information on Connectivity,
cabling systems and networking, visit CONNECTWORLD

© Copyright, 2006 , All rights reserved